Touch Screen Monitor 7in USB HDMI IPS LCD For Raspberry Pi Windows Aida64 Jetson. Free driver in Raspberry Pi support Raspbian, Ubuntu, Kali, win10I0T and other single touch. Free driver in computer xp (single point), win7 (some single point) win8, winl0 five point touch. Support for HDMI devices such as set-top boxes, BB black, Banana/0range pi, and car recorders. Support backlight switch control, open 400ma current, turn off 120ma current.
Support universal Android usb interface, usb voltage input does not affect, usb touch interface card off. USB touch interface supports USB touch, supports display power supply, does not affect usb voltage interface. Free driver Support for Ubuntu, Debian, Cent0S, Arch, Kali, Redhat, etc. Full HD fidelity stereo audio output, support 44.
1Khz to 196Khz audio track. LCD display size: 7 inch. Module structure:HDMI Display + USB touch +PCB. Active area dimesnsions:154.21x85.92mm. Pixel pitch:0.1506x0.1432mm.
Color pixel arrangement:RGB stripe. Display mode:Transmissive type, Normally white mode.View direction(Gray inversion): 6'clock. Numbers of colors:16.7M. CTP structure type: Cover Glass + ITO Glass (G+G). How to use with Raspbian/Ubuntu Mate/Win10 IoT Core System.
Step 1, Install Raspbian official image. Download the latest image from the official download. Install the system according to the official tutorial steps. Step 2, modify the config.After the programming of Step1 is completed, open the config. Txt file of TF card root directory and. Add the following code at the end of the file, save and eject Micro SD Card safely. Hdmi_cvt 1024 600 60 6 0 0 0. Step 3, Drive the 7inch HDMI display with the Raspberry Pi. Insert the TF Card to Raspberry Pi, connect the Raspberry Pi and LCD by HDMI cable.
Connect USB cable to one of the four USB ports of Raspberry Pi, and connect the other end of the USB cable to the USB port of the LCD. Then supply power to Raspberry Pi; after that if the display and touch both are OK, it means drive successfully (please use the full 2A for power supply). How to use as PC monitor. Connect the computer HDMI output signal to the LCD HDMI interface by using the HDMI cable. Connect the LCD's USB Touch interface (Either of the two MicroUSB) to the USB port of the device.
It can use as a secondary screen, use with AIDA64 to shows the status of your computer. How to assemble the case. 1 x Micro HDMI adapter. This item is in the category "Computers/Tablets & Networking\Monitors, Projectors & Accs\Monitors".
The seller is "rideksshop" and is located in this country: CN. This item can be shipped worldwide.