Lcd Display Monitor

A61L-0001-0074 compatible LCD display for FANUC CNC system replace CRT monitor

A61L-0001-0074 compatible LCD display for FANUC CNC system replace CRT monitor
A61L-0001-0074 compatible LCD display for FANUC CNC system replace CRT monitor
A61L-0001-0074 compatible LCD display for FANUC CNC system replace CRT monitor

A61L-0001-0074 compatible LCD display for FANUC CNC system replace CRT monitor
The signal interface is HONDA MR-20M, and the display is 14 inch color CRT display. The replacement LCD monitor specification as follows. Support 15KHz to 48KHz frequency line signal, field frequency of 48Hz to 75Hz, the positive and negative automatic adaptation, input line field automatic frequency scanning. Support field input for digital TTL signals or analog signals. Input interface: D-sub, 15PIN, BNC interface and other interfaces, can be customized. Support black and white display, monochrome display, color display, true color display. 5., support automatic recognition of the screen, adjust the width. Support separation of synchronous signal HV, composite synchronization signal Cs or synchronous signal compound in the video G signal (Sog), polarity, positive and negative are automatically identified.

7.75-500 ohm high input impedance, suitable for all kinds of strong and weak signal source. Technical parameters of industrial screen. KTV148 RGB EGA CGA MDA Screen. 246184.4mm(lengthwidth), 12.1 inches, 4:3. H-row scanning: 15Khz-48Khz Plus-n-minus auto-adaptation.

V-row scanning: 48hz-75hz Plus-n-minus auto-adaptation. RGB, RGsB, RGBS, RGBHV signals. HV row filed separation, HV row field mix Cs, green segregation Sog.

TTL digital level: 2.4 5.0V or Low 0.0 0.8V. Analog model level: 0.7-2.5VP-P. 75-500 O high input impedance which can adapts to various signal sources.

9-pin signal line (optional), 15-pin signal line, BNC input. Temperature: -10 +65, humidity: 20% 95%. Temperature: -30 +70, humidity: 10% 95%.

The replacement LCD display as follows. You can replace it as following. Remove the old CRT display and empty the original CRT position.

Our products all adopt imported industrial LCD panel and power supplies from companies such as SHARP & AUO to ensures that it has a long service life, low failure rate, suitable for working condition of continuous use of 24 hours, without daily maintenance, with exactly same mechanical size of the original hole site, and can quickly restore production as long as to plug in the signal interface and power interface. Compared with the original CRT monitor, LCD monitor has advantages of simple structure, lower power consumption, little daily breakdown, strong vibration resistance, strong electromagnetic interference resistance, simple maintenance, light weight, and easier to standardization, etc. The item "A61L-0001-0074 compatible LCD display for FANUC CNC system replace CRT monitor" is in sale since Monday, July 18, 2016. This item is in the category "Business & Industrial\Other Business & Industrial". The seller is "cntop201301" and is located in DongGuan,GuangDong.

This item can be shipped worldwide.

  • Model: A61L-0001-0074
  • Country/Region of Manufacture: China
  • MPN: A61L-0001-0074
  • Brand: CNTOP


A61L-0001-0074 compatible LCD display for FANUC CNC system replace CRT monitor